Green spectrophotometric and spectrofluorimetric determination of biperiden hydrochloride using erythrosine B sensing probe.

Erythrosine B (EB) is a food colorant antiviral xanthene dye that has many applications as a color additive in pharmaceuticals and cosmetics. Its use as a sensor for spectrofluorimetric and spectrophotometric analysis of amine-based pharmaceuticals renders many advantages because of its availability, low cost, rapid labeling, and high sensitivity. Herein, two fast and sensitive spectrofluorimetric and spectrophotometric methods were established for the estimation of the anti-Parkinson drug, biperiden (BIP) hydrochloride (HCl), in its raw material and tablet forms. The proposed methods depended on the interaction between the phenolic group of EB and the tertiary amino group of the studied analyte to form an ion-pair complex at pH 4 using the Britton Robinson buffer. The spectrofluorimetric method is based on the measurement of the quenching power of BIP HCl on the fluorescence intensity of EB at λex/em = 527.0/550.9 nm. This method was rectilinear over the concentration range of 0.1-1.0 µg/mL with a limit of detection (LOD) = 0.017 µg/mL and a limit of quantification (LOQ) = 0.05 µg/mL. Meanwhile, the colorimetric method involved monitoring the absorbance of the formed ion-pair complex at 555 nm, showing a linearity range of 0.4-5.0 µg/mL with LOD = 0.106 µg/mL and LOQ = 0.322 µg/mL. The proposed methods were assessed for the greenness, indicating the greenness of the developed methods.

Utility of the food colorant erythrosine B as an effective green probe for quantitation of the anticancer sunitinib. Application to pharmaceutical formulations and human plasma.

Sunitinib is a tyrosine kinase inhibitor used for the treatment of renal cell carcinoma and gastrointestinal stromal tumors. In this study, two spectroscopic methods, spectrofluorometric and spectrophotometric, were utilized to quantify sunitinib in different matrices. In method I, the native fluorescence of erythrosine B was quenched by forming ion-pair complex with increasing quantities of sunitinib. This approach was utilized for measuring sunitinib in its dosage forms and spiked plasma. After excitation at 528 nm, the quenching of fluorescence is linearly related to the concentration across the range of 0.05-0.5 µg mL-1 at 550 nm in Britton-Robinson buffer (pH 4.0), with a correlation value of 0.9999 and a high level of sensitivity with detection limit down to 10 ng mL-1 . Method II relies on spectrophotometric measurements of the produced complex at 550 nm across a range of 0.5-10.0 µg mL-1 , with good correlation value of 0.9999. This method has a detection limit down to 0.16 µg mL-1 . The proposed methodologies were validated according to International Conference on Harmonization (ICH) guidelines with satisfactory results. The stoichiometry of the reaction was determined through the application of Job's method, while the mechanism of quenching was investigated by employing the Stern-Volmer plot. The designated methods were used to estimate sunitinib in its capsules and in spiked human plasma. Additionally, the statistical analysis of the data revealed no substantial differences when compared to previous reported spectroscopic method. Green assessment tools provide further details about the eco-friendly nature of the methods.

Turn-off fluorescence of S,N-doped carbon dots for determination of two nitro-containing drugs in dosage forms and human plasma.

This study describes the development of an environmentally-friend optical nanosensor for the rapid spectrofluorimetric assessment of two nitro-compounds, namely nitrofurantoin and dantrolene in their dosage forms and plasma samples. A one-step synthetic technique successfully created very bright water-soluble carbon quantum dots doped with sulfur and nitrogen (S,N-CQDs). Carbon was derived from citric acid, while nitrogen and sulfur were obtained from thiosemicarbazide. The dimensions of the synthesized dots were measured using a high-resolution transmission electron microscope. FT-IR spectroscopy was used to determine which functional groups were located on their surfaces. The nanosensor's fluorescence emission peaked intensely at 415 nm after excitation at 345 nm with a quantum yield of about 0.52. The inherent fluorescence of the nanosensors gradually decreased upon addition of the studied analytes in increasing concentrations. The fluorescence reduction of nanosensor with the concentrations of the investigated drugs demonstrated linear correlation within the ranges of 0.5-8.0 µg/mL and 1.0-10.0 µg/mL with limits of detection of 0.14 µg/mL (0.59 µM) and 0.23 µg/mL (0.73 µM) for nitrofurantoin and dantrolene, respectively. The recommended method was used to determine the concentrations of the investigated drugs in their commercial capsules, with recoveries ranging from 97.90 % to 101.57 % and low percent RSD values less than 2 %. Moreover, the method was adapted for the in-vitro analysis of the two analytes in spiked human plasma samples with % recoveries from 95.20 % to 102.20 %. The mechanism of interaction between each analyte and the dots was also investigated. The selectivity of the approach for measuring analytes concentration in the presence of excipients, co-formulated medications, or co-administered pharmaceuticals was further evaluated through an interference study. The suggested method's validity was evaluated in accordance with ICH criteria.

Simultaneous spectrofluorimetic determination of remdesivir and simeprevir in human plasma.

As new infectious mutations of SARS-CoV-2 emerged throughout the world, innovative therapies to counter the virus-altered drug sensitivities were urgently needed. Several antiviral options have been in clinical trials or in compassionate use for the treatment of SARS-CoV-2 infections in an attempt to minimize both clinical severity and viral shedding. Recent research indicated that simeprevir acts synergistically with remdesivir, allowing for a multiple-fold decrease in its effective dose when used at physiologically acceptable concentrations. The goal of this work is to develop a sensitive synchronous spectrofluorimetric approach to simultaneously quantify the two drugs in biological fluids. Using this method, remdesivir and simeprevir could be measured spectrofluorimetrically at 283 and 341 nm, respectively, without interference from each other using Δλ of 90 nm. The effect of various experimental parameters on the fluorescence intensity of the two drugs was extensively explored and optimized. For each of remdesivir and simeprevir, the method exhibited a linearity range of 0.10-1.10 µg/mL, with lower detection limits of 0.01 and 0.02 µg/mL and quantification limits of 0.03 and 0.05 µg/mL, respectively. The high sensitivity of the developed method permitted the simultaneous determination of both drugs in spiked plasma samples with % recoveries ranging from 95.0 to 103.25 with acceptable standard deviation values of 1.92 and 3.04 for remdesivir and simeprevir, respectively. The validation of the approach was approved by the International Council of Harmonization (ICH) guidelines.

First derivative synchronous spectrofluorimetric analysis of bisoprolol fumarate and ivabradine in pharmaceutical and biological matrices. Investigation of the method greenness.

A novel, facile, rapid, and precise synchronous spectrofluorimetric method was evolved for the simultaneous estimation of bisoprolol fumarate and ivabradine in dosage forms and biological fluids. The estimation is based on measuring the first derivative of the synchronous fluorescence spectra of ivabradine and bisoprolol fumarate in ethanol at Δλ = 80 nm. The peak amplitudes are measured at 234.4 nm (zero-crossing point of ivabradine) and 244.0 nm (zero-crossing point of bisoprolol fumarate) to simultaneously analyze bisoprolol fumarate and ivabradine, respectively. The spectrofluorimetric method was optimized by investigating different solvent systems, pH values, and surfactants. The proposed method was linear over concentration ranges 30.0-200.0 ng/ml and 30.0-180.0 ng/ml for ivabradine and bisoprolol fumarate, respectively with detection limits of 4.88 and 5.28 ng/ml. The developed method was used for individual assay of the studied compounds in their pharmaceutical dosage forms with high percentage recoveries. Moreover, the method was applied to analyze ivabradine and bisoprolol fumarate in spiked human urine with percentage recoveries of 99.98 ± 1.16 and 99.95 ± 1.96 for ivabradine and bisoprolol fumarate, respectively. The method greenness was also investigated by Analytical GREEnness (AGREE), Analytical Eco-Scale, and Green Analytical Procedure Index (GAPI) metrics, which ensured the ecofriendship of the proposed method.

Thiosemicarbazide functionalized carbon quantum dots as a fluorescent probe for the determination of some oxicams: application to dosage forms and biological fluids.

In this study, highly fluorescent water-soluble nitrogen and sulfur doped carbon quantum dots (N, S-CQDs) were synthesized via a one-step hydrothermal process utilizing citric acid as a carbon source and thiosemicarbazide as a sulfur and nitrogen source. The obtained N, S-CQDs exhibited an intense emission band at 415 nm (λ ex = 345 nm). In the presence of either piroxicam, tenoxicam or lornoxicam, the emission band at 415 nm was significantly quenched which might be triggered due to destruction of the surface passivation layer of the N, S-CQDs. A linear correlation was found between the reduction in the fluorescence intensity of N, S-CQDs and the concentration of each drug in the ranges of 2.0-25.0 µM, 10.0-100.0 µM and 20.0-200.0 µM with correlation coefficients of more than 0.999 for all drugs. The detection limits were 0.49 µM, 1.58 µM and 4.63 µM for piroxicam, tenoxicam and lornoxicam, respectively. The effect of experimental parameters affecting the performance of the method was investigated and optimized. The developed sensor has the advantages of simplicity, time-saving, convenience and satisfactory selectivity for determination of the studied drugs in dosage forms with high % recoveries (98.86-101.69%). The method was extended for determination of piroxicam in spiked plasma with % recoveries ranging from 97.95-101.36%. The method was validated in accordance with International Council of Harmonization (ICH) standards, and the results obtained were compared statistically to those given by reported methods, indicating no significant differences in the level of accuracy and precision. The mechanism of the quenching process was studied and elucidated. The structure-activity relationship between the three drugs and the quenching efficiency was also studied and discussed.

Determination of three antiepileptic drugs in pharmaceutical formulations using microfluidic chips coupled with light-emitting diode induced fluorescence detection.

In this study, a facile, sensitive, and precise lab-on-a-chip electrophoretic method coupled with light-emitting diode induced fluorescence (LED-IF) detection was developed to assay three antiepileptic drugs, namely, vigabatrin, pregabalin, and gabapentin, in pharmaceutical formulations. The analytes were derivatised offline for the first time with fluorescine-5-isothiocyanate (FITC) to yield highly fluorescent derivatives with λex/em of 490/520nm. The FITC-labelled analytes were injected, separated, and quantitated by a microfluidic electrophoresis device using fluorescence detection. The labelled analytes were monitored using a blue LED-IF system. The separation conditions were significantly optimised adding specific concentrations of heptakis-(2,6-di-O-methyl)-ß-cyclodextrin (HDM-ß-CD) and methylcellulose to the buffer solution (40mM borate buffer). HDM-ß-CD acted as a selective host for the studied antiepileptic drugs, rendering a high separation efficiency. Methylcellulose was used as an efficient dynamic coating polymer to prevent the labelled drugs from being adsorbed on the inner surfaces of the poly (methylmethacrylate) microchannels. A laboratory-prepared ternary mixture of the three antiepileptic drugs was separated within 100s with acceptable resolution between all the three analytes (Rs>3) and a high number of theoretical plates (N) for each analyte (N≈106 plates/m). The sensitivity of the method was enhanced approximately 80-fold by stacking to yield a detection limit below 0.6ngmL-1 in the concentration range of 2.0-200.0ngmL-1. The method was successfully validated for analysing the studied drugs in their pharmaceutical formulations.

Stacking-cyclodextrin-microchip electrokinetic chromatographic determination of gabapentinoid drugs in pharmaceutical and biological matrices.

A facile, rapid, and highly sensitive microchip-based electrokinetic chromatographic method was developed for the simultaneous analysis of two gabapentinoid drugs, gabapentin (GPN) and pregabalin (PGN). Both drugs were first reacted with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) via nucleophilic substitution reactions to yield highly fluorescent products with λex/em 470/540nm. Analyses of both fluorescently labeled compounds were achieved within 200s in a poly(methyl methacrylate) (PMMA) microchip with a 30mm separation channel. Optimum separation was achieved using a borate buffer (pH 9.0) solution containing methylcellulose and ß-cyclodextrin (ß-CD) as buffer additives. Methylcellulose acted as a dynamic coating to prevent adsorption of the studied compounds on the inner surfaces of the microchannels, while ß-CD acted as a pseudo-stationary phase to improve the separation efficiency between the labeled drugs with high resolution (Rs>7). The fluorescence intensities of the labeled drugs were measured using a light emitting diode-induced fluorescence detector at 540nm after excitation at 470nm. The sensitivity of the method was enhanced 14- and 17-fold for PGN and GPN, respectively by field-amplified stacking relative to traditional pinched injection so that it could quantify 10ngmL-1 for both analytes, with a detection limit lower than 3ngmL-1. The developed method was efficiently applied to analyze PGN and GPN in their pharmaceutical dosage forms and in biological fluids. The extraction recoveries of the studied drugs from plasma and urine samples were more than 89% with%RSD values lower than 6.2.

A validated HPLC method for the determination of dimethyl-4,4'-dimethoxy-5,6,5',6'-dimethylene dioxybiphenyl-2,2'-dicarboxylate (DDB) with fluorescence detection in raw material and pill form: application to an in vitro dissolution test and a content uniformity test.

A simple, sensitive and rapid HPLC method with fluorescence detection for the determination of dimethyl-4,4'-dimethoxy-5,6,5',6'-dimethylene dioxybiphenyl-2,2'-dicarboxylate (DDB) in the raw material and pill form was developed. Liquid chromatography was performed on a C18 column (250 × 4.6 mm i.d., 5 µm particle size), the mobile phase consisted of methanol and 0.05 M sodium dihydrogen phosphate buffer (80 : 20, v/v), and the apparent pH of the mobile phase was adjusted to 3. The fluorescence detector was operated at excitation/emission wavelengths of 275/400 nm. The proposed method allows the determination of DDB within concentration range 0.1-1.5 µg/mL with a limit of detection of 0.032 µg/mL, a limit of quantification of 0.097 µg/mL and a correlation coefficient of 0.9997. The proposed method has been successfully applied for the analysis of DDB in its pills with a percentage recovery of 98.45 ± 0.32. The method was fully validated according to ICH guidelines. Moreover, the high sensitivity of the method permits its use in an in vitro dissolution test for DDB under simulated intestinal conditions. In addition, the proposed method was extended to a content uniformity test according to USP guidelines.

Stability-indicating spectrofluorimetric method for determination of itopride hydrochloride in raw material and pharmaceutical formulations.

A simple, sensitive and rapid spectrofluorimetric method for determination of itopride hydrochloride in raw material and tablets has been developed. The proposed method is based on the measurement of the native fluorescence of the drug in water at 363 nm after excitation at 255 nm. The relative fluorescence intensity-concentration plot was rectilinear over the range of 0.1-2 µg/mL (2.5 × 10(-7)-5.06 × 10(-6) mole/L), with good correlation (r = 0.9999), limit of detection of 0.015 µg/mL and a lower limit of quantification of 0.045 µg/mL. The described method was successfully applied for the determination of itopride hydrochloride in its commercial tablets with average percentage recovery of 100.11 ± 0.32 without interference from common excipients. Additionally, the proposed method can be applied for determination of itopride in combined tablets with rabeprazole or pantoprazole without prior separation. The method was extended to stability study of itopride. The drug was exposed to acidic, alkaline, oxidative and photolytic degradation according to ICH guidelines. Moreover, the method was utilized to investigate the kinetics of the alkaline, acidic and oxidative degradation of the drug. A proposal for the degradation pathways was postulated.

Simultaneous determination of floctafenine and its hydrolytic degradation product floctafenic acid using micellar liquid chromatography with applications to tablets and human plasma.

A stability-indicating micellar liquid chromatography (MLC) method was developed and validated for the assay of floctafenine (FLF) in the presence of its degradation product and main metabolite, floctafenic acid (FLA). The analysis was carried out on a CLC Shim-Pack octyl silane (C8) column (150 x 4.6 mm id, 5 microm particle size) using a micellar mobile phase consisting of 0.15 M sodium dodecyl sulfate, 10% n-propanol, and 0.3% triethylamine in 0.02 M orthophosphoric acid (pH = 3). The mobile phase was pumped at a flow rate of 1.0 mL/min with UV detection at 360 nm. The method showed good linearity for FLF and FLA over the concentration ranges of 0.5-25.0 and 0.4-10.0 microg/mL, with LODs of 0.16 and 0.12 microg/mL, respectively. The developed method was successfully applied to the determination of FLF in commercial dispersible tablets, with mean recovery of 98.87 +/- 1.37%. Also, the proposed method was specific for the analysis of FLF in presence of the co-formulated drug thiocolchicoside in laboratory-prepared tablets, with mean recovery of 100.50 +/- 1.07%. Statistical comparison of the results obtained by the proposed MLC method with those obtained by a comparison method showed good agreement. Moreover, the method was extended to study the degradation behavior of FLF under different International Conference on Harmonization recommended conditions such as alkaline, acidic, oxidative, thermal, and photolytic. The method was further applied for direct determination of FLA as the main metabolite of FLF in human plasma without prior extraction steps, with mean recovery of 110.50 +/- 6.5%.

Validated spectrophotometric methods for determination of Alendronate sodium in tablets through nucleophilic aromatic substitution reactions.

BACKGROUND: Alendronate (ALD) is a member of the bisphosphonate family which is used for the treatment of osteoporosis, bone metastasis, Paget's disease, hypocalcaemia associated with malignancy and other conditions that feature bone fragility. ALD is a non-chromophoric compound so its determination by conventional spectrophotometric methods is not possible. So two derivatization reactions were proposed for determination of ALD through the reaction with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) and 2,4-dinitrofluorobenzene (DNFB) as chromogenic derivatizing reagents. RESULTS: Three simple and sensitive spectrophotometric methods are described for the determination of ALD. Method I is based on the reaction of ALD with NBD-Cl. Method II involved heat-catalyzed derivatization of ALD with DNFB, while, Method III is based on micellar-catalyzed reaction of the studied drug with DNFB at room temperature. The reactions products were measured at 472, 378 and 374 nm, for methods I, II and III, respectively. Beer's law was obeyed over the concentration ranges of 1.0-20.0, 4.0-40.0 and 1.5-30.0 µg/mL with lower limits of detection of 0.09, 1.06 and 0.06 µg/mL for Methods I, II and III, respectively. The proposed methods were applied for quantitation of the studied drug in its pure form with mean percentage recoveries of 100.47 ± 1.12, 100.17 ± 1.21 and 99.23 ± 1.26 for Methods I, II and III, respectively. Moreover the proposed methods were successfully applied for determination of ALD in different tablets. Proposals of the reactions pathways have been postulated. CONCLUSION: The proposed spectrophotometric methods provided sensitive, specific and inexpensive analytical procedures for determination of the non-chromophoric drug alendronate either per se or in its tablet dosage forms without interference from common excipients. GRAPHICAL

Simultaneous determination of sulpiride and mebeverine by HPLC method using fluorescence detection: application to real human plasma.

A new simple, rapid and sensitive reversed-phase liquid chromatographic method was developed and validated for the simultaneous determination of sulpiride (SUL) and mebeverine Hydrochloride (MEB) in the presence of their impurities and degradation products. The separation of these compounds was achieved within 6 min on a 250 mm, 4.6 mm i.d., 5 m particle size Waters®-C18 column using isocractic mobile phase containing a mixture of acetonitrile and 0.01 M dihydrogenphosphate buffer (45:55) at pH = 4.0. The analysis was performed at a flow rate of 1.0 mL/min with fluorescence-detection at excitation 300 nm and emission at 365 nm. The concentration-response relationship was linear over a concentration range of 10- 100 ng/mL for both MEB and SUL with a limit of detection 0.73 ng/mL and 0.85 ng/mL for MEB and SUL respectively. The proposed method was successfully applied for the analysis of both MEB and SUL in bulk with average recoveries of 100.22 ± 0.757% and 99.96 ± 0.625% respectively, and in commercial tablets with average recoveries of 100.04 ± 0.93% and 100.03 ± 0.376% for MEB and SUL respectively. The proposed method was successfully applied to the determination of MEB metabolite (veratic acid) in real plasma simultaneously with SUL. The mean% recoveries (n = 3) for both MEB metabolite (veratic acid) and SUL were 100.36 ± 2.92 and 99.06 ± 2.11 for spiked human plasma respectively. For real human plasma, the mean% recoveries (n = 3) were and respectively.

Synchronous fluorescence spectrofluorimetric method for the simultaneous determination of metoprolol and felodipine in combined pharmaceutical preparation.

A rapid, simple and sensitive synchronous specrtofluorimetric method has been developed for the simultaneous analysis of binary mixture of metoprolol (MTP) and felodipine (FDP). The method is based upon measurement of the synchronous fluorescence intensity of the two drugs at Δλ of 70 nm in aqueous solution. The different experimental parameters affecting the synchronous fluorescence intensities of the two drugs were carefully studied and optimized. The fluorescence intensity-concentration plots were rectilinear over the ranges of 0.5-10 µg/mL and 0.2-2 µg/mL for MTP and FDP, respectively. The limits of detection were 0.11 and 0.02 µg/mL and quantification limits were 0.32 and 0.06 µg/mL for MTP and FDP, respectively. The proposed method was successfully applied for the determination of the two compounds in their commercial tablets and the results obtained were favorably compared to those obtained with a comparison method.

Spectrophotometric determination of tizanidine and orphenadrine via ion pair complex formation using eosin Y.

A simple, sensitive and rapid spectrophotometric method was developed and validated for the determination of two skeletal muscle relaxants namely, tizanidine hydrochloride (I) and orphenadrine citrate (II) in pharmaceutical formulations. The proposed method is based on the formation of a binary complex between the studied drugs and eosin Y in aqueous buffered medium (pH 3.5). Under the optimum conditions, the binary complex showed absorption maxima at 545 nm for tizanidine and 542 nm for orphenadrine. The calibration plots were rectilinear over concentration range of 0.5-8 µg/mL and 1-12 µg/mL with limits of detection of 0.1 µg/mL and 0.3 µg/mL for tizanidine and orphenadrine respectively. The different experimental parameters affecting the development and stability of the complex were studied and optimized. The method was successfully applied for determination of the studied drugs in their dosage forms; and to the content uniformity test of tizanidine in tablets.

Development and validation of stability indicating method for determination of sertraline following ICH guidlines and its determination in pharmaceuticals and biological fluids.

BACKGROUND: Sertraline is a well known antidepressant drug which belongs to a class called selective serotonin reuptake inhibitor. Most published methods do not enable studying the stability of this drug in different stress conditions. RESULTS: Two new methods were developed for the determination of sertraline (SER). Both methods are based on coupling with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) in borate buffer of pH 7.8 and measuring the reaction product spectrophotometrically at 395 nm (Method I) or spectrofluorimetrically at 530 nm upon excitation at 480 nm (Method II). The response-concentration plots were rectilinear over the range 2-24 µg/mL and 0.25-5 µg/mL for methods I and II respectively with LOD of 0.18 µg/mL and 0.07 µg/mL, and LOQ of 0.56 µg/mL and 0.21 µg/mL for methods I and II, respectively. CONCLUSION: Both methods were applied to the analysis of commercial tablets and the results were in good agreement with those obtained using a reference method. The fluorimetric method was further applied to the in vivo determination of SER in human plasma. A proposal of the reaction pathway was presented. The spectrophotometric method was extended to stability study of SER. The drug was exposed to alkaline, acidic, oxidative and photolytic degradation according to ICH guidelines. Moreover, the method was utilized to investigate the kinetics of oxidative degradation of the drug. The apparent first order rate constant and t1/2 of the degradation reaction were determined.

Spectrophotometric determination of certain CNS stimulants in dosage forms and spiked human urine via derivatization with 2,4-Dinitrofluorobenzene.

A new spectrophotometric method is developed for the determination of phenylpropanolamine HCl (PPA), ephedrine HCl (EPH) and pseudoephedrine HCl (PSE) in pharmaceutical preparations and spiked human urine. The method involved heat-catalyzed derivatization of the three drugs with 2,4-dinitrofluorobenzene (DNFB) producing a yellow colored product peaking at 370 nm for PPA and 380 nm for EPH and PSE, respectively.The absorbance concentration plots were rectilinear over the range of 2-20 for PPA and 1-14 µg/mL for both of EPH and PSE, respectively. The limit of detection (LOD) values were 0.20, 0.13 and 0.20 µg/mL for PPA, EPH and PSE, respectively and limit of quantitation (LOQ) values of 0.60 and 0.40 and 0.59 µg/mL for PPA, EPH and PSE, respectively. The analytical performance of the method was fully validated and the results were satisfactory. The proposed method was successfully applied to the determination of the three studied drugs in their commercial dosage forms including tablets, capsules and ampoules with good percentage recoveries. The proposed method was further applied for the determination of PSE in spiked human urine with a mean percentage recovery of 108.17 ± 1.60 for (n = 3). Statistical comparison of the results obtained with those of the comparison methods showed good agreement and proved that there was no significant difference in the accuracy and precision between the two methods. The mechanism of the reaction pathway was postulated.

Utility of certain nucleophilic aromatic substitution reactions for the assay of pregabalin in capsules.

BACKGROUND: Pregabalin (PG) is an anticonvulsant, analgesic and anxiolytic drug. A survey of the literature reveals that all the reported spectrophotometric methods are either don't offer high sensitivity, need tedious extraction procedures, recommend the measurement of absorbance in the near UV region where interference most probably occurs and/or use non specific reagent that don't offer suitable linearity range. RESULTS: Two new sensitive and simple spectrophotometric methods were developed for determination of pregabalin (PG) in capsules. Method (I) is based on the reaction of PG with 1,2-naphthoquinone-4-sulphonate sodium (NQS), yielding an orange colored product that was measured at 473 nm. Method (II) is based on the reaction of the drug with 2,4-dinitrofluorobenzene (DNFB) producing a yellow product measured at 373 nm. The different experimental parameters affecting the development and stability of the reaction product in methods (I) and (II) were carefully studied and optimized. The absorbance-concentration plots were rectilinear over the concentration ranges of 2-25 and 0.5-8 µg mL-1 for methods (I) and (II) respectively. The lower detection limits (LOD) were 0.15 and 0.13 µg mL-1 and the lower quantitation limits (LOQ) were 0.46 and 0.4 µg mL-1 for methods (I) and (II) respectively. CONCLUSION: The developed methods were successfully applied to the analysis of the drug in its commercial capsules. The mean percentage recoveries of PG in its capsule were 99.11 ± 0.98 and 100.11 ± 1.2 (n = 3). Statistical analysis of the results revealed good agreement with those given by the comparison method. Proposals of the reaction pathways were postulated.

Stability-indicating spectrofluorimetric method for the assay of ziprasidone in capsules.

A simple, rapid and highly sensitive spectrofluorimetric method was developed for determination of ziprasidone hydrochloride (ZPS) in capsules. The method is based on measuring the native fluorescence of ZPS in acetate buffer of pH 4.5 at 398 nm after excitation at 315 nm. The fluorescence-concentration plot was rectilinear over the range of 0.05-0.80 µg mL(-1) with a lower detection limit (LOD) of 6.0 ng mL(-1) and quantification limit (LOQ) of 20.0 ng mL(-1). The method was fully validated and successfully applied to the determination of ZPS in its capsules with average percentage recovery of 99.7 ± 1.4. The method was extended to stability study of ZPS. The drug was exposed to acidic, alkaline, oxidative and photolytic degradation according to ICH guidelines. Moreover, the method was utilized to investigate the kinetics of the alkaline, acidic and oxidative degradation of the drug. A proposal for the degradation pathways was postulated.

Second-derivative synchronous fluorescence spectroscopy for the simultaneous determination of cinnarizine and nicergoline in pharmaceutical preparations.

A rapid, simple, and highly sensitive second-derivative synchronous fluorometric method has been developed for the simultaneous analysis of binary mixtures of cinnarizine (CN) and nicergoline (NIC). The method is based upon measurement of the native fluorescence of these drugs at constant wavelength difference (Deltalambda) = 80 nm in aqueous methanol (50%, v/v). The different experimental parameters affecting the native fluorescence of the studied drugs were carefully studied and optimized. The fluorescence-concentration plots were rectilinear over the range of 0.025-1.5 and 0.25-5.5 microg/mL for CN and NIC, respectively, with lower detection limits of 0.58 and 0.82 ng/mL and quantitation limits of 1.93 and 2.73 ng/mL for CN and NIC, respectively. The proposed method was successfully applied for the determination of the studied compounds in synthetic mixtures and in commercial tablets. The results obtained were in good agreement with those obtained with reference methods. The high sensitivity attained by the proposed method allowed the determination of CN in real and spiked human plasma. The mean recovery in the case of spiked human plasma [number of trials (n) = 3] was 102.82 +/- 2.17%, while that in real human plasma (n = 3) was 105.25 +/- 2.05.